 |
| This
drawing is fromthe general
arrangement |
| drawings
for a 20 HP. |
| This
shows enough |
| information
to make a |
| muffler
from sheet and |
| other
metal stock. |
|
See picture at right. |
|
 |
| All
of these parts were |
| made
from steel stock |
| to
specifications from |
| GA
drawings or from |
| measurements
on the |
| car. |
|
 |
| The
muffler and tail |
| pipes
and hangers that |
| were
made using GA |
| drawings.
One can buy |
| such
a system from the |
| UK,
but none are made |
| as
an exact duplicate |
| according
to the book. |
|
 |
| The
head pipe with the |
| flange
necessary to fit |
| the
nut that hold the |
| pipe
to the exhaust |
| manifold. |
|
 |
| Making
brackets to fit |
| the
cylindrical muffler. |
|
 |
| The
muffler installed on |
| the
chassis with the |
| Stainless
Steel heat |
| shield
cover on. |
| The
muffler is wrapped |
| with
heat insulation |
| before
the shield is |
| put
over it. This makes |
| a
neat and quiet |
| "silencer". |
|
 |
| The
shop with a mandrel |
| bender
used these bent |
| rods
to make the tail |
| pipes.
The patterns are |
| from
GA drawings. |
|
|
|
Return
to Main Page
